Anti-Slip Polyurethane Garage Floor Paint – 20 Litre | Professional High-Build Coating

A premium single-pack polyurethane floor paint engineered for garages, workshops, warehouses, and industrial floors. The built-in anti-slip aggregate delivers a textured finish that reduces slip risk in wet and dry conditions, while the high-build polyurethane resin provides exceptional durability, chemical resistance, and UV stability. Available in 16 colours including greys, blues, greens, red, yellow, black, cream, and a Pre-Seal primer option.

Technical Specifications

Property	Value
Type	Single-pack polyurethane resin floor coating
Volume	20 litres per tin
Coverage	Approx. 5–8 m² per litre (10–16 m² per 20L tin) at recommended thickness
Dry Film Thickness	100–150 microns per coat
Recommended Coats	2 (after Pre-Seal primer coat)
Anti-Slip	Yes — integral aggregate
Finish	Textured satin
Colours Available	16 (see colour selector above)
Touch Dry	2–4 hours at 20°C
Full Cure	7 days
Chemical Resistance	Oils, fuels, mild acids, cleaning agents
UV Stability	Good — suitable for exposed and naturally lit areas
Application	Roller, brush, or spray
Surface	Concrete, screed, stone, brick (primed)

Performance Features

• Anti-Slip Textured Finish — Integral aggregate provides grip in wet and dry conditions, reducing slip risk in compliance with HSE workplace safety guidelines
• High-Build Polyurethane Resin — 100–150 micron DFT per coat fills minor surface imperfections and outlasts standard epoxy and acrylic floor paints
• Exceptional Wear Resistance — Withstands heavy foot traffic, forklift tyres, and wheeled equipment without flaking or peeling
• Chemical & Oil Resistance — Resists engine oils, fuels, hydraulic fluid, brake fluid, and common workshop chemicals
• UV Stable — Does not yellow or fade significantly under natural light, maintaining appearance in garages with windows or skylights
• Easy Single-Pack Application — No mixing required. Apply by roller, brush, or airless spray. No specialist equipment needed
• 16 Colour Options — Full range from practical greys to safety yellow, enabling colour-coded zones and branded floor schemes
• Pre-Seal Primer Available — Penetrating primer seals porous concrete prior to topcoat application for maximum adhesion and finish quality

Colour Guide

Colour	Best Used For
Dark Grey / Light Grey / Mid Grey	Garages, workshops, industrial floors — classic professional look
Dark Blue / Mid Blue / Light Blue	Commercial premises, car showrooms, sports facilities
Dark Green / Mid Green / Light Green	Agricultural buildings, food areas, military/MOD
Red / Signal Red / Red Oxide	Safety marking, pedestrian zones, hazard identification
Yellow	Safety lanes, forklift paths, hazard marking
Black	Show garages, car workshops, high-end commercial
Cream	Food areas, clean rooms, bright working environments
Pre-Seal Primer	Primer coat for porous concrete — apply before colour coat

Application Instructions

1. Prepare the surface — Clean thoroughly. Remove oil, grease, and loose material. New concrete must cure for at least 28 days
2. Apply Pre-Seal primer — For porous or previously unsealed concrete, apply one coat of Pre-Seal and allow to dry (4–6 hours)
3. Apply first topcoat — Stir well. Apply by roller or brush at 5–8 m² per litre. Allow 16–24 hours between coats
4. Apply second topcoat — For full coverage and maximum durability, a second coat is recommended
5. Allow to cure — Light foot traffic after 24 hours; vehicle traffic after 7 days full cure

Applications

• Domestic garages and driveways
• Car workshops and MOT bays
• Warehouses and distribution centres
• Factory and manufacturing floors
• Agricultural buildings and farm yards
• Commercial showrooms and retail units
• Sports halls and leisure facilities
• Safety lane and zone marking

Sold per 20-litre tin. Free UK delivery on qualifying orders. Pre-Seal primer recommended for new or porous concrete surfaces.